Home > Hard Drive > How To Make Ide Boot Instead Of Sata

How To Make Ide Boot Instead Of Sata


I understand the choices are a PCI SATA controller card (with molex to SATA power adapter) or an IDE to SATA adapter? so after boot i've got this message: "Error loading operating system". The solution was in the the power menu - APM (which I take to mean Automatic Power Management) - Enabled - I changed this to Disabled and everything worked fine - im pretty sure my motherboard is an Nvidia nForce 405 but i could be completely wrong May 7, 2007 #1 howard_hopkinso TS Rookie Posts: 24,177 +19 Hello and welcome navigate here

Same goes for SATA controllers.I think some SATA drives have legacy IDE plugs on them, but I'd only use the SATA plug with the small serial cable. ps. I've had a 200GB SATA running off my separate SATA controller for three months now. If the SATA drive is the only drive in the IDE motherboard system and therefore the primary drive, does the adapter & SATA combination permit booting as normal?Click to expand... http://www.tomshardware.com/answers/id-1666178/install-boot-windows-sata-hard-disk-pci-ide-motherboard.html

How To Make Ide Boot Instead Of Sata

Don't you realise you managed to boot it from USB.. All Rights Reserved. However, that computer only supports SATA and I doubt it will boot from a PCI IDE card.

This is my parents PC. meh... Yes, my password is: Forgot your password? Ide And Sata Drives In Same Computer However if I install Win7 on an IDE disk on the same machine then Win7 can cope perfectly with the same disk as a secondary-disk.Note: If at all possible I would

share|improve this answer answered Oct 8 '13 at 4:53 jozzas 233214 This. How To Connect Ide Hard Drive To Sata Motherboard I am currently running a Maxtor 200GB SATA drive as the master and a Maxtor 120GB IDE drive as the slave. PCI won't corrupt and if the PCI bus is the limiting factor (possible as iirc the fastest drives now actually can sustain 133 MB/s on their outer tracks), then using the http://www.techsupportforum.com/forums/f10/booting-w-sata-hd-on-older-mobo-150367.html But you are proposing to use a SATA drive, and ALL SATA drives and controllers have 48-bit LBA Support.

I'm using an Asus P4P800-VM mobo and it requires an advanced (not for beginners says the user guide) BIOS setting to use both serial-ata and parallel-ata devices. Ide Hard Drive Jumper Settings Useful Searches Recent Posts Menu Forums Forums Quick Links Search Forums Recent Posts Menu Log in Sign up AnandTech Forums: Technology, Hardware, Software, and Deals Forums > Hardware and Technology > Is "I know" appropriate or rude in coversation What do the spear and watermelon jokes in "Airplane!" mean? Is it theoretically possible to deploy backdoors on ports higher than 65535?

How To Connect Ide Hard Drive To Sata Motherboard

Because unlike with Win 9X, you can't transfer a HDD with Win NT(e.g. But without the BIOS support to boot a drive installed via PCI, I can't say. How To Make Ide Boot Instead Of Sata After installing the mobo and updating BIOS with latest VIA chipset drivers, everytime I boot the computer, I get "New hardware found" and the PC proceeds to install Primary IDE Channel Motherboard With Ide And Sata Ports There are two things to keep in mind, do not overload your power supply or strange difficult problems will begin to occur and make the correct BIOS settings for your data

Depending upon your bios and startup options, if it is like mine you have the option either within the bios, or at startup, which drive to choose as the primary. http://magicuresoft.com/hard-drive/installed-new-hard-drive-and-it-wont-boot.html I can't get these 2 drives to coexist & am wondering what I am doing wrong. Obviously the 250 GB drive has this; ALL SATA controllers have this; but check your Win XP! Not the answer you're looking for? Sata And Ide Hard Drives Together

  1. Also how do I install from that screen?
  2. I have tried setting it up as Master, Slave, Cable Select, Primary, Secondary...all to no avail.
  3. I'll double check the motherboard drivers but I'm sure the one's I've got are up to date.
  4. How do you say "to miss out"?
  5. Ask a Question See Latest Posts TechSpot Forums are dedicated to computer enthusiasts and power users.
  6. Therefore most people can run 6 devices note that each sata connector MUST NOT be shared you may only connect 0 - 2 sata devices and 0 - 4 IDE devices.If
  7. May 9, 2007 #6 gavilan TS Rookie Posts: 62 Tedster said: You cannot use Windows XP from another motherboard or computer to boot on a different computer.
  8. What to think?
  9. Just hoping that a drive (any drive) won't fail doesn't count.

hard-drive boot sata share|improve this question edited Sep 11 '12 at 19:40 asked Sep 11 '12 at 5:56 Kevin 6113 Are you sure your original boot drive is broken? I am having the same issue here, with a PCI to SATA card, on an old motherboard: MSI K7T Turbo. Why would one aim off when navigating with a map and compass? http://magicuresoft.com/hard-drive/how-to-connect-sata-hard-drive-to-motherboard.html I didn't want to re-install windows (until vista) and then I might switch things around.

Heck just buy a used one. What Are The Two Goals When Implementing A Raid Solution What's even more confusing is that I formatted the SATA drive in Windows yesterday while running off my IDE Hd and successfully copied files to it... You should have a spare IDE controller or at least a spare channel/port.If your system didn't have any spare IDE ports, then you could buy a separate IDE/ATA/ATAPI controller card that

Another step you should perform to minimize the chance of blue-screening is to run sysprep while the HD is booted on the old computer.

What happens if I use Reno on a Ragnaros hero affected by Alexstrasza? help!!buck Related Resources How to make SATA boot instead of IDE? (and other issues...) solved Making my Sata drive the boot drive instead of the IDE Bios trying to boot ide And you can plug them in 1 by 1 so you can test if are achieving the boot sequence you want! –aliasgar Sep 11 '12 at 14:12 | show 10 more How Many Hard Drives Can Be Connected To A Single Ide Cable Maybe it is just the bios which can't handle sata on start up (anymore).

Or, you could just get a better M/B and a SATA. I just rebuilt my PC using an ASUS A7V880 Mobo, AMD AthlonXP 2800+ with 1Gb RAM. Onto the next issue. weblink Thanks.

XP/7) from one computer to another(whose MBRD has a different chipset), except when windows has been specially prepared(apparently acronis can make that preparation). Its reliability will soon become questionable. No problem booting either one. Nothing to do with IDE/SATA.

Once in the program you will see a list of hard drives for your computer under the “Disk management” tab. 12 Partition the drive and format the drive. No problem booting either one. Is there any way to "convince" the BIOS to boot from the PCI card? (Programmer here so I'm not afraid to get my hands dirty given proper instructions on how to Did this article help you?

The concept Of "Large Hard Drive" at that time did not exceed 137 GB (by the disk manufacturer's way of counting). Some Older Operating systems will not accept the entire space of the newer hard drives, you may need to partition the new drive into two or three partitions to access its Connect again your "broken HDD" and it will boot. You can then partition and format it to your hearts desire.The Nvraid disk has the drivers for the raid controller.

I have a Gigabyte motherboard that will take 4 SATA drives, 2 PATA drives and 2 CD/DVD drives so I can use the PATA drives in a RAID Array as the The motherboard Model is IBM - 06p2525 - made in 2000). Pressing too hard on them may break them off 5 You will feel it slide and come to a stop, when it stops then it is in place. I'll check out your computer and see what I can see. 04-12-2007, 09:29 PM #5 spikeee Registered Member Join Date: Oct 2006 Location: Malaysia Posts: 119 OS: Win

MYSQL/PHP - Count rows and redirect High Performance Workstation PC Reimage Current Temperatures Phillips 55"PFL 5506/H7 does not... Unplugged my IDE HD, booted off the Windows CD with only SATA drive plugged in and ran set up. If anyone can tell me how to do this, it would be most helpful.Anyway... Posts: 6,000 +15 You cannot use Windows XP from another motherboard or computer to boot on a different computer.

It was set up and running well for years with 1 SATA drive as a boot drive, another SATA drive to store TV recordings, and an IDE drive to store more