Home > Windows Xp > When I Shutdown My Computer It Restarts Xp

When I Shutdown My Computer It Restarts Xp


SOLUTION: Click Start, click Run, type SERVICES.MSC, click OK. There is a problem with the SAUSB.SYS file, apparently part of the Win98 SE driver set for this device, retained during an upgrade to Win XP. Correspondent Ron Spruell found that disabling the Terminal Services service reduced his shutdown time from over 2 minutes (hanging at the "Windows is shutting down" screen) to about 10 seconds. Check the box labeled "Show Hidden Devices." If it's available on your computer, there will be a red X on the APM/NT Legacy Node. http://magicuresoft.com/windows-xp/windows-xp-blue-screen-on-startup-then-restarts.html

Correspondent "Curiefleas" wrote that his reboot-on-shutdown problem was solved when he used a third party partitioning program to convert his NTFS partition to FAT32. I have two power buttons, and I have tried both of them. i have win 8.1 i shut it down it won't restart Can't find your answer ? Tip for Faster Windows Shutdown: You can set your computer to shut down upon pressing the power button by going to the Display Properties window (by Right Clicking on some empty http://www.howtogeek.com/forum/topic/xp-restarts-after-shut-down

When I Shutdown My Computer It Restarts Xp

Stop 0x7B on restarting means Win XP lost access to the system partition or boot volume during the startup process, due to a bad device driver, boot sector virus, resource conflict, Reports: · Posted 7 years ago Top Topic Closed This topic has been closed to new replies. Just joking, I hope.ç Johncar Report johncar- Apr 4, 2010 at 01:46 AM Sinhu, is your post of 4.4.10 a suggestion how I might fix my PC, if so, I do Currently, the leading cause of Windows XP shutdown problems is hardware incompatibility, including driver issues.

Since then, SBLive 5.1 came out, and I had installed the 5.1 version of the software in Windows 2000 Pro. This can cause Win XP to hang at a blank screen (with mouse and keyboard nonresponsive) when you try to shutdown or restart. Previously, this was only resolved by disabling the modem. Computer Restarts After Shutdown Windows 7 All Rights Reserved.

If you experience this problem, be sure to close all running programs before attempting shutdown and see if this solves your problem. If this is the problem, well, not much of a solution other than to get up-to-date USB/Motherboard drivers, updated USB device drivers, and possibly add a different USB card or HUB The same devices plugged into an Asus A7M-266D dual AMD 2000MP system on the same OS worked without problem.) * “Wake on” power settings Power-management settings that have the computer “wake” More like this Why Can't I Access This Web Site?

If his several USB devices (PDA cradle, flash card reader, etc) were plugged into the motherboard’s USB ports, his computer would reboot on an attempted shutdown; but when, instead, he plugged about 4 months. Go to Roxio's site and download the latest version of 5.x http://www.roxio.com/ Windows XP APM (Advanced Power Management). Press F8 during the restart and select " Last Known Good Configuration." If you catch the problem when it first occurs (meaning you likely have installed only one or two drivers

When I Shutdown My Computer It Restarts Windows Xp

phases then it would blue screen and restart. Reboot in Safe Mode. When I Shutdown My Computer It Restarts Xp Under "System Failure," uncheck the box in front of "Automatically restart." Here are some things that have produced this reboot-instead-of-shutdown symptom: By now, the Roxio/Adeptec Easy CD / Direct CD software Windows Xp Restarts Automatically After Shutdown Helpful +1 Report linkjr4226 Sep 5, 2010 at 07:36 AM Same here.

UDFRINST. weblink By default, Windows reboots after crashing, producing the effect you describe. Computing.Net and Purch hereby disclaim all responsibility and liability for the content of Computing.Net and its accuracy. To learn how to get this patch, see MSKB 307274, "Windows XP Stops Responding (Hangs) During Windows Shutdown." The necessary patch is included in Windows XP Service Pack 1, and also Windows Xp Will Not Shut Down

SOLUTION TO THE SIDE-EFFECT: Apply one of the repair methods in MSKB Article 270008, Code 31 Messages Occur After Removing Adaptec Easy CD Creator 4.02c in Windows 2000 (Tip from Peter PROGRAMS HANG / BECOME UNRESPONSIVE. Their solution was to remove that particular mouse and all worked fine. http://magicuresoft.com/windows-xp/shutdown-timer-windows-xp.html thank you for the suggestion.

Sometimes programs don't close down correctly, or hang for some other reason during the Windows shutdown process. I've been a systems analyst/developer for over 25 years. Under “Startup & Recovery,” click Settings.

SOLUTION: Upgrade to the latest Win XP service pack. (Reference & more information: MSKB 317326.) USB: Keyboard or Mouse + Selective Suspend.

To my mind, that's stupid behavior, since it masks the actual problem. He ran into a problem trying to get his computer to shut down: He was running Windows XP Professional and it absolutely refused to shut down. SHUTDOWN PROBLEMS IN WINDOWS 9x. You can either launch this batch file manually, or (in Win XP Professional) use GPEDIT.MSC) to specify this batch file as the shutdown script (under Computer Configuration | Windows Settings |

A general reminder of a great general tip: You will get the best results if all RAM in a particular computer matches in all respects! The same devices plugged into an Asus A7M-266D dual AMD 2000MP system on the same OS worked without problem.) "Wake on" power settings Power-management settings that have the computer "wake" on Disabling the "restart on system failure" feature may permit the exact cause to be isolated: Right-click on My Computer, click Properties, click the Advanced tab. his comment is here But i woul think you would want the unit to "shut down" when pressing the power button.

If yes, you need to download the software and install on the machine. I'd really appreaciate it! a second that but......it's better to be young and broke than old and bent skreennameMay 30, 2009, 9:27 AM Some Dell's experienced this problem and it had to do with leaking Backup your Registry before the change (e.g, run System Restore to create a restore point).

MODEMS: Intel Ambient HaM Modem. Site visitor Jim Porter found that his Asus P5GDC-V Deluxe motherboard had a "wake on" setting in Device Manager | Properties | Advanced rather than in the BIOS or Power Management