Home > Windows Xp > Windows Xp Change Motherboard Without Reinstall

Windows Xp Change Motherboard Without Reinstall

Contents

Booting into Safe Mode produces> similar results only listing the files as they load and it halts.> Knowing that there would be re-activation issues with XP, I assumed> that I would If you need more info this link will get you started. The BIOS change will impact the overall performance of the system, so using a slipstreamed or XP with SP3 installation disk is the better option. Slipstreaming Windows XP with Service Pack 2 (SP2) Another Slipstream step by step Option #2 Setting XP to new hardware. http://magicuresoft.com/windows-xp/reinstall-windows-xp-without-cd.html

A friend wanted better computing power but the motherboard they had (an A13G + V3.0) had just about the highest CPU it could handle in it (Athlon 64 X2 Dual Core). Though this method will still leave you with all the ghosted items in Device Manager, can still be interrupted by drivers which need to be uninstalled, and will remove all your For such systems, we recommend you use the Microsoft method. Do Not BOOT into Windows XP on first boot after Motherboard or Hard Drive change!

Windows Xp Change Motherboard Without Reinstall

It reminded me a problem with some old BIOS - if keyboard isn't attached it'd output a message "The keyboard is not attached. Reboot and access BIOS Depending on the BIOS and OEM manufacturer, set date and time [very important], hard drive detection, CPU settings [if necessary] and boot order. no XP CD) to use for the repair install if it is necessary. Back to top BC AdBot (Login to Remove) BleepingComputer.com Register to remove ads #2 Highjinks Highjinks Members 43 posts OFFLINE Gender:Male Location:San Diego Local time:08:37 AM Posted 23 October

  1. The Windows XP setup F2 function is useless for me because it immediately asks me to insert something in the a: drive, and I don't have one.
  2. U need to set this to IDE mode for windows xp.
  3. If you do make the choice to boot Windows XP without doing the repair install or upgrade run from Windows, I once again highly recommend you create an image of the
  4. If booting from CD is not an option, return to BIOS and make sure booting from CD is the first boot option.
  5. Copyright © 2002/2003/2004/2005/2006/2007/2008/2009/2010/2011/2012/2013, Jim Foley/The Elder Geek, All Rights Reserved Worldwide Reproduction, in any form, of information on this site is prohibited without express written permission.
  6. jhug87Apr 7, 2014, 6:03 AM If it were up to me, I would absolutely upgrade to Windows 7.
  7. If it is not listed with the Show compatible hardware checkbox filled, your system may not survive this process unless the new motherboard is from the same chipset vendor.
  8. What does the line "So long and thanks for all the fish!" mean?
  9. Matt Dell April 11, 2013 at 4:59 am Best guess would be drivers for your hard drive drivers.
  10. As with any procedure you attempt there are caveats.

The Windows OS line for me is what I'm trying to get rid of completely - but I want to do that gradually. A few days ago, I had a small wish to boost up the performance of my home desktop PC (after SP2) and server, so I sent them to upgrade M/B, CPU, To tell you the truth I expected the new motherboard to install anything including Windows XP, just like my old motherboard. Transferring Windows Xp To Another Computer If I delete the partition altogether it tells me there is no HD available.

I would not attempt booting into the new hardware configuration when the option to do a repair install or upgrade run from Windows is not an option. Reboot your system for the driver changes to take effect. Why don't we use weights to store energy? https://support.microsoft.com/en-us/kb/824125 Are there any ways to read the BSOD text without actually looking at the screen?

Installation will continue, prompting you from time to time to supply some additional setup information. Windows Xp Compatible Motherboards Stay Away From These 2 Features Mac Upgraded to macOS Sierra? Press F1 to continue". The system shows a normal Windows XP start screen for a second, then it shows the BSOD for a fraction of second, then tries to reboot again.

Move Windows Xp Hard Drive To New Computer

I had been using an old Asus A8N-SLI Deluxe motherboard and upgraded it to a AMD Bulldozer FX-8120. http://www.tomshardware.com/forum/153898-45-boot-changing-motherboard-processor At this stage you may also want to remove your video drivers, since they'll likely need reinstalling anyway. Windows Xp Change Motherboard Without Reinstall So you need to either not use SATA (switch to IDE) or download the proper SATA drivers and either slipstream them into a clean windows xp iso or create a driverdisk How To Copy Windows Xp From One Computer To Another ACTIVATION What happens when you change a motherboard or move a hard drive depends on the accumulated changes made within a 120 day period since initial activation.

A list of all the current installations of Windows XP will be displayed in the lower portion of the window. this contact form The reason is that XP doesn't have generic AHCI drivers, though such drivers are possible. How you enter the BIOS setup depends on the motherboard, but the manual should give specific instructions for the procedure. I have to do that on my old motherboard too, then transfer it to the new motherboard to have the drivers installed. Windows Xp Motherboard Info

Note: USB devices are reinstalled on a per-root basis, so it is perfectly normal to see them more than once in any list with Device Manager in this mode. Username Forum Password I've forgotten my password Remember me This is not recommended for shared computers Sign in anonymously Don't add me to the active users list Privacy Policy

current Part of this procedure involves doing a Repair Installation of Windows XP. http://magicuresoft.com/windows-xp/windows-xp-change-language-to-english.html However, there are a couple of reasons that it could blue screen. 1.

Anyway, I think your right about my motherboard being too new for Windows XP. Clone Windows Xp To Another Computer This means you will have to create your own XP installation disk with the appropriate SATA drivers slipstreamed or you could change your BIOS settings for your hard driver controller in What bothers me the most is not being able to install Windows 7.

Unfortunately it's not up to me, and XP is quite a bit cheaper than Windows 7.

Or you can have freedom. Back to top #7 Captain_Chicken Captain_Chicken BC Advisor 1,243 posts OFFLINE Gender:Male Local time:11:37 AM Posted 27 October 2015 - 07:15 AM Unless you have a retail "boxed" copy of While the old motherboard was still usable, I used the following procedure - I changed the IDE+AGP controller driver to the Windows default driver (Standard Dual Channel PCI IDE Controller and Fix Hdc Before connecting to the internet, read the Blaster worm warning !

As with all hardware, you should always check for updates. Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros Get IT Center Brands Tutorials Other sites Tom's Guide Tom's IT Knowing that there > would be> >re-activation issues with XP, I assumed that I would at > least be able to> >boot and then somehow re-activate with Microsoft after > that. Check This Out Entire books have been written about PC hardware and how to swap components so I'm just going to touch on the highlights of swapping out the motherboard.

More resources See also Windows won't load after changing motherboard. As for the SATA driver - I have the mobo support disk, and it looks like it contains this driver. After logging on, Windows will complain about drivers, and it will install some automatically. Check the motherboard manufacturers web site for updated drivers and any drivers that need to be loaded from a floppy at the beginning of XP installation.

Don’t fall for the old joke about looking for the “Any” key. Label all the connections that attach to the motherboard and remove them one by one. I've copied the mbr.bin from this disk to the /dev/sda - it didn't help. If you have a test PC handy, try it out.